VALET (Disable Automatic Arming feature)>

The system will passive arm (automatically) every time you exit the> vehicle. The valet deactivates the automatic (passive) arm feature,> preventing the system from arming every time you exit the vehicle (i.e.> at valet parking, a car wash, for vehicle servicing, etc.). When in> valet mode the alarm can only be set with the remote transmitter.>

NOTE: When the system is in the valet, the remote control must be used> to operate the system.>

TO TURN ON THE VALET--> 1) Turn the ignition key OFF.> 2) Turn the ignition key to the ACC position.> 3) Press the valet switch down until the LED on the status monitor> turns on.> -----The system is now in the valet (the system will not automatically> -----arm when the last door is closed).> 4) Remove the ignition key, exit the vehicle and close all doors.>

NOTE: The LED on the status monitor will start flashing. Although the> security system is off, the LED will flash as a visual deterrent> against theft or vandalism.>

TO TURN OFF THE VALET--> 1) Turn the ignition key OFF.> 2) Turn the ignition key to the ACC position> 3) Press the valet mode switch down until the LED on the status monitor> turns off.> 4) The valet is now off, passive arming is activated (the system WILL> automatically arm when the last door is closed).>