How do I reject getting my own comments on e-mail?
Re: Getting rid of carbon buildup in engine
Hello Guest
  
  • Login
• Register…
• Start blog
  • Who, Where, When
• What is interesting here?
• Duels
  • Polls
• Avatars
• Interests
  • Cities and Countries
• Random blog
• Users search
  • Search
• Games
• Tests
• CarGuru
  • Ñîîáùåñòâà
• Talxy Chat
• Horoscope
• Online
 
Register!

CarGuru > Toyota > Re: Getting rid of carbon buildup in engine 15 July 2006 18:32:29

  Recent blog posts: 
  Forums:   
  Discuss: 
  Recent forum topics: 
  Recent forum comments:
  Ìîäåðàòîð:

Re: Getting rid of carbon buildup in engine

John Smyth 2 April 2005 12:13:45
 Do you remember where you bought the redline. I went to 2 auto stores and
they had both never heard of it. BTW, I'm in Sydney Australia.

Thanks
John

<nospampls2002@yaho­o.com> wrote in message
news:1112190755.216­130.294270@g14g2000c­wa.googlegroups.com.­..> It's not brake fluid cleaner - but brake cleaner - a solvent that> evaporates with no residue for cleaning brake components. Maybe he> meant brake cleaner fluid - but I've most often seen it in an aerosol> spray.> Before I ever put solvent into the intake - though many old time> mechanics like the cup of water poured slowly method (I wouldn't be> doing that either), take the time to _read_ the technical data section> on Redline's complete fuel system cleaner page - the part about> cleaning carbon off the valve faces and cylinder head - takes around> 10,000 miles, but the cost is low, it works safely, and generally> improves (and maintains) performance and economy overall.>
The idea of pouring water _slowly_ through the intake on a fully warmed> engine is that the water turns to steam inside the combustion chamber -> steam cleans the inside under pressure - like when mechanics have found> a head gasket slow coolant leak and the area nearby is all shiny clean> - but if I'm reading your post correctly - this has already been done.>
If you put a strong solvent - like brake cleaner or Chemtool into the> engine you're also stripping away lubricants that protect the running> engine components. Brake cleaner is designed for brakes, and Chemtool> is designed for cleaning carburetors or fuel system components with the> engine off. They talk about pouring some in the oil and running for a> few minutes then draining, but that could dislodge bits and chunks that> do additional damage.> If you're really interested about removing carbon from the ring lands> and oil seals, check Auto-rx.com. They have a cleaner that works over> 500 miles or so and has had good results.>


Add comment
Josh 2 April 2005 13:37:07 permanent link ]
 "John Smyth" <ssssmyth@tpg.com.a­u> wrote in message
news:424a8a32@dnews­.tpgi.com.au...> Apparently my engine has carbon buildup inside it.>
The repairer poured a glass of water in the carby while the engine was> running to clean some of it out.>
He said I could do it properly by pouring a cup of "Brake fluid cleaner"> down the carby while the engine ran until stalling. Then waiting 15
minutes.> Then revving it to clean out all the carbon.>
Has anyone heard of these techniques before?> Does it work?> Is it safe?> And what is "Brake fluid cleaner" anyway?

Do not spray brake cleaner in your manifold. You kept saying 'carby' did you
mean Intake Manifold? Is your car fuel injected? The thing is you have this
little device called an O2 sensor, and brake fluid will probably F it up,
its not meant for to use that way. Water indeed can clean off carbon from
the engine, the best results from using water though is to use it regularly
on a water injection system. You probably don't need to go that far, though.

What I would do is pick up a can of 'seafoam' Find a vacuum tube on your
manifold and let it suck some out of the bottom half of a Styrofoam cup. Let
it suck just a few seconds until the car starts to stall, then let it go.
Beware that this stuff causes a *massive* amount of smoke to pour out your
exhaust for a good 10 minutes, remember...*massive­* If you can't find a
vacuum hose or don't want to do it that way, simply take off your intake
hose and spray the seafoam directly into the manifold.

One other thing to consider is this. If your car has a catalytic converter
and your engine has a real bad carbon build up, there is the possible chance
your converter is close to being useless or already is. The seafoam will
clear all that junk out and may end up causing converter problems, some
people have actually seen the carbon build up shoot out the exhaust tips.

The best advice is to keep your car regularly maintained by spraying a bit
of seafoam or water into the manifold every oil change, just a bit should
help. Do the seafoam at your own risk! If you want more info just Google it
you will probably find a ton, also do NOT use seafoam on a rotary engine.

--Josh


Add comment
Guest 15 July 2006 18:32:29 permanent link ]
 there are no carbs on saturns
carb cleaner cleans throttle body do it while car is off to avoid mixing it with oil
but even with car on with no throttle applied it will stall the car anyway
but as far as cleaning carbon build up just use marvel mystery oil/ its a great upper cylinder lube put some in the gas tank some in the oil and slowly pour some into the throttle body at about 1/8 throttle or just enough to suck it in and not stall the car.
i have noticed ALL saturns burn oil they do it because the piston rings get carbon build up around them very quickly poor design by saturn after it burns enough oil the spark plugs get filled with nasty black oil deposits and simply foul out like a 2 stroke dirtbike with the wrong jets running way too FAT or RICH.
THE MARVEL MYSTERY OIL breaks up the carbon stuck to the rings and valves and all other parts quickly the rings begin to seal the cylinders again giving more compression
and less oil blow by better fuel economy more power and longer lasting spark plugs
i use it every oil change because i have 200 k on my 95 sl and she gets 31 mpg and runs smooth as could be.
joe . from lil old rhode island
Add comment
 

Add new comment

As:
Login:  Password:  
 
 
  
 
respect your talk pals, avoid using obscene language, typing entire messages in CAPS, posting buy/sell ads or violating netiquette or the RF Criminal Code..


CarGuru > Toyota > Re: Getting rid of carbon buildup in engine 15 July 2006 18:32:29

see also:
GP2: Silverstone: Trident Racing race…
F1: British GP: MF1 race notes
F1: British GP: Super Aguri race notes
pass tests:
see also:
i need help
hesitation
Car Jerks at low RPM

  Copyright © 2001—2009 Car-Guru
Idea: Miñhael Monashev
See Help and FAQ in the community support.car-guru.com.
Write in the community about the bugs you have noticedbugs.car-guru.com.
Write your offers and comments in the communities suggest.car-guru.com.
Information for parents.
Write us at:
If you would like to report an abuse of our service, such as a spam message, please .