How to restrict who may read my entries?
95 Mercury Cougar V8 - Replace valve guides?
Hello Guest
  
  • Login
• Register…
• Start blog
  • Who, Where, When
• What is interesting here?
• Duels
  • Polls
• Avatars
• Interests
  • Cities and Countries
• Random blog
• Users search
  • Search
• Games
• Tests
• CarGuru
  • Ñîîáùåñòâà
• Talxy Chat
• Horoscope
• Online
 
Register!

CarGuru > Technology > 95 Mercury Cougar V8 - Replace valve guides? 3 March 2005 00:07:37

  Recent blog posts: 
  They have birthday today: 
  Forums:   
  Discuss: 
  Recent forum topics: 
  Recent forum comments:
  Ìîäåðàòîð:

95 Mercury Cougar V8 - Replace valve guides?

Libby Chantel 2 March 2005 22:58:48
 If you let it idle for a few minutes, then take off, it pours smoke out
the exhaust for about a minute. Someone told me that this is because
the valve guides are bad. How would you know definitively that this is
caused by valve guides, and if so, what would be the steps involved in
replacing them? I've never done valve guides so don't know what is
involved.

Thanks,
Libby

Add comment
Libby Chantel 3 March 2005 00:53:44 permanent link ]
 Ok, maybe I shouldn't have said "pours out". Too dramatic I guess. When
you take off after idling, it leaves a cloud of oil smoke in the air.
the longer it idles, the bigger the cloud. Under normal driving
conditions, it usually doesn't smoke. I am not having any trouble with
fouled plugs, the car runs very good. The thing is, when it is cold
started, it doesn't smoke. I would have thought that the oil would have
leaked down out of the heads into the cylinders during the night and
thus would blow out the exhaust when it is started the next day. Is
this right?

Add comment
Steve 3 March 2005 02:24:46 permanent link ]
 Libby Chantel wrote:
Ok, maybe I shouldn't have said "pours out". Too dramatic I guess. When> you take off after idling, it leaves a cloud of oil smoke in the air.> the longer it idles, the bigger the cloud. Under normal driving> conditions, it usually doesn't smoke. I am not having any trouble with> fouled plugs, the car runs very good. The thing is, when it is cold> started, it doesn't smoke. I would have thought that the oil would have> leaked down out of the heads into the cylinders during the night and> thus would blow out the exhaust when it is started the next day. Is> this right?>

On a cold start, the oil may sorta stick to the (cold) exhaust manifold
walls and burn off slowly, whereas when the engine is hot it flashes to
smoke much more quickly.

BTW, I got to thinking- this is probably a Modular v8 (overhead cam)
engine. So my advice about changing seals is not nearly complicated
enough :-/­

Also, be aware that the Modulars have had a number of problems with some
engines showing excessive oil consumption over the years. I'm not sure
what all the various and sundry issues were, so it might be worthwhile
checking to see if there are applicable technical service bulletins from
Ford.

Add comment
Libby Chantel 3 March 2005 18:40:59 permanent link ]
 This is the overhead cam V8. So can you give me the repair procedure
for valve seals? Go ahead, I can take it :)­
And what does "modular" mean? Bad news, no doubt.
Libby

Add comment
Ad absurdum per aspera 3 March 2005 22:51:26 permanent link ]
 
So can you give me the repair procedure> for valve seals? Go ahead, I can take it :)­

I wouldn't recommend doing it yourself, especially on an overhead-cam
engine, without referring to a factory service manual or at least a
good aftermarket manual.

Time was, there were some tricks for replacing some such things without
removing the cylinder heads. Never really looked at the issue on a
"modular."

As mentioned earlier, before trying to get too tricky here, I'd also
recommend compression testing and a look at each plug to make really
sure that the engine doesn't have other physical problems that would
require you to tear it down anyway. (And other diagnostics to rule out
the possibility that you're just putting too much gasoline into a
basically okay engine under some conditions.)

See, after ten years and some unmentioned but likely six-figure
mileage, and maintenance and usage unknown to me, its internal
condition could range from just broken in to generally worn and/or
specifically broken in some way, and it just doesn't make sense to
fixate on one symptom and one fix until you're resaonably sure that
that's both the main problem and the whole of the problem.

And what does "modular" mean? Bad news, no doubt.

The current generation of Ford smallblock V8's, replacing the venerable
5-liter (which has its roots in the early 1960s). The modularity
refers mostly to an extensible design pattern. I think a '95 would be
one of the early ones.

Best of luck,
--Joe

Add comment
Steve 4 March 2005 22:14:26 permanent link ]
 Libby Chantel wrote:
This is the overhead cam V8. So can you give me the repair procedure> for valve seals? Go ahead, I can take it :)­

I honestly don't know the specifics for that engine. But its more than
just removing the rocker arms- you may have to pull the cams too. Or
maybe not (see, I SAID I don't know).
And what does "modular" mean? Bad news, no doubt.> Libby

The Ford Modular v8 (in 4.6L and 5.4L versions) is the engine family
that replaced the "Windsor" v8 family (302 and 351) in the early 90s.
The Modular series had a pretty rough going in the early years- lots of
reliability problems to get ironed out, but its evolved into a good
powerplant. At the time it was introduced, it had a TON of high-tech
features not found in either GM or Chrysler engines of the time- things
like sintered-metal connecting rods with "cracked" rod caps (the rod cap
is physically cracked off the rod during manufacture so that each cap is
a specific rough-interface fit to each rod), and hypereutectic pistons.
The latter contributed to a lot of TSBs for high oil consumption and
piston slap- something that GM is just now going through with their own
engines that use hypereutectic pistons. The Modular also has some really
pain-in-the-butt features, like using jackscrews to laterally locate the
main bearing caps. And its since been leapfrogged in technology by
engines like Chryslers 4.7 SOHC and especially the 5.7L Hemi, and GM's
Gen-III v8s. But like I said, its not "bad news" anymore.


Add comment
 

Add new comment

As:
Login:  Password:  
 
 
  
 
respect your talk pals, avoid using obscene language, typing entire messages in CAPS, posting buy/sell ads or violating netiquette or the RF Criminal Code..


CarGuru > Technology > 95 Mercury Cougar V8 - Replace valve guides? 3 March 2005 00:07:37

see also:
drive a car and get paid
Rear "safty window"
1994 740IL - catalytic converter bad?
pass tests:
see also:
1997 Pontiac Grand Am
options on truck

  Copyright © 2001—2009 Car-Guru
Idea: Miñhael Monashev
See Help and FAQ in the community support.car-guru.com.
Write in the community about the bugs you have noticedbugs.car-guru.com.
Write your offers and comments in the communities suggest.car-guru.com.
Information for parents.
Write us at:
If you would like to report an abuse of our service, such as a spam message, please .