What is Atom?
Flasher ? for 2001 up/Led Taillights
Hello Guest
  
  • Login
• Register…
• Start blog
  • Who, Where, When
• What is interesting here?
• Duels
  • Polls
• Avatars
• Interests
  • Cities and Countries
• Random blog
• Users search
  • Search
• Games
• Tests
• CarGuru
  • Ñîîáùåñòâà
• Talxy Chat
• Horoscope
• Online
 
Register!

CarGuru > Jeep Willys > Flasher ? for 2001 up/Led Taillights 15 February 2005 02:41:50

  Recent blog posts: 
  They have birthday today: 
  Forums:   
  Discuss: 
  Recent forum topics: 
  Recent forum comments:
  Ìîäåðàòîð:

Flasher ? for 2001 up/Led Taillights

Intergate 12 February 2005 20:56:07
 I am going to convert my taillights to the LED round Flush mount. I
have read many articles on what needs to be done but all were done on
pre 2001 TJ's.

The problem will be the flasher will need to be changed cause it will
flash to fast.

All the mods I have seen to solve the problem were done on the pre
2001 Flasher.

They changed in 2001. I have a 2004 TJ

Any body done this on a 2001 or newer and solved the problem?

Thanks,

Tim

--
Tim

[____]
(OIIIIIIO)




Add comment
Jerry Bransford 15 February 2005 00:08:07 permanent link ]
 That RC network flasher was actually a second-generation flasher.
Flashers truly from the 'olden days' actually used a bi-metalic piece of
metal that flexed when it got hot from current passing through it. Then
as it flexed upward from getting hot and broke the electrical
connection, it would then cool back off again and re-make the electrical
connection, only to get hot again and once again break the circuit.
Cool design that even made its own clicking noise that have to be
electronically generated now. :)­ Oh, the bi-metalic thing worked by a
sandwich of two dissimilar metals. The metal on one side heated faster
than different kind of metal on the other side which caused it to bend.
Cool invention actually. :)­

Jerry

Jeff Strickland wrote:> Back in the olden days, the flasher was a simple RC network, resistor> capacitor, that charged and discharged to control the blink rate. The> resistor was the filiment in the lamps. You are taking the resistor out of> the circuit, assuming the circuit is still an RC network. You can simply> splice a resistor in line that mimics the resistance of the lamp filiment,> and the flasher will never know that it is powering an LED array.>
I would use a 1/4 watt, 470 ohm resistor, or there abouts. Practice with a> couple, or just measure the resistance of a brake lamp bulb, then get a> resistor that is within about 10% of that value, and can handle relatively> hight current. You don't really need the current capability, but this will> provide overheat protection if the brake lights are on for a very long time.> You'll need a resistor on both the left and the right side.>
The Turn Signals and the Brake Lamps are the same part of the lamp/LED> assembly, and the Running Lamps are a different part. Be sure to add the> resistor to the turn signal/brake lamp side of the assembly.>
"Intergate" <roadrnnr99@REMOVE.­yahoo.com> wrote in message> news:110sd9bhi6qu0c­7@corp.supernews.com­...>
I am going to convert my taillights to the LED round Flush mount. I>>have read many articles on what needs to be done but all were done on>>pre 2001 TJ's.>>
The problem will be the flasher will need to be changed cause it will>>flash to fast.>>
All the mods I have seen to solve the problem were done on the pre>>2001 Flasher.>>
They changed in 2001. I have a 2004 TJ>>
Any body done this on a 2001 or newer and solved the problem?>>
Thanks,>>
-- >> Tim>>
[____]>>(OIIIIIIO)>>

--
Jerry Bransford
PP-ASEL N6TAY
See the Geezer Jeep at
http://members.cox.­net/jerrypb/
Add comment
DougW 15 February 2005 02:41:50 permanent link ]
 Jeff Strickland did pass the time by typing:> Gosh Jerry, you REALLY are older than dirt!>
That kind of flasher makes the turn signal come on and stay on steady - not> flash- when a light at the other end of the car burns out. If the front> light burns out, the rear light won't blink because there isn't enough> current in the circuit to heat the bimetal parts inside the flasher.

(only slightly older than dirt here)

And as the bulbs corrode (draw more current) you
get the superblinkystrobe effect.

--
DougW


Add comment
 

Add new comment

As:
Login:  Password:  
 
 
  
 
respect your talk pals, avoid using obscene language, typing entire messages in CAPS, posting buy/sell ads or violating netiquette or the RF Criminal Code..


CarGuru > Jeep Willys > Flasher ? for 2001 up/Led Taillights 15 February 2005 02:41:50

see also:
USAC: C/V: Kenly results 2007-04-21
Re: Sim Racing FOV
RALLY: TARMAC: Team VIP Targa Tasmania…
pass tests:
see also:
Hi people!!!!
Hi)
1994 Nissan Sentra air conditioning…

  Copyright © 2001—2009 Car-Guru
Idea: Miñhael Monashev
See Help and FAQ in the community support.car-guru.com.
Write in the community about the bugs you have noticedbugs.car-guru.com.
Write your offers and comments in the communities suggest.car-guru.com.
Information for parents.
Write us at:
If you would like to report an abuse of our service, such as a spam message, please .