Re: SN65 project

How to know who is online?

Hello Guest

• Login
• Register…
• Start blog

• Who, Where, When
• What is interesting here?
• Duels

• Polls
• Avatars
• Interests

• Cities and Countries
• Random blog
• Users search

• Search
• Games
• Tests
• CarGuru

• Сообщества
• Talxy Chat
• Horoscope
• Online

CarGuru > Ford > Re: SN65 project 28 March 2005 23:35:38

Recent blog posts:

95 mirage
I have a 95 mirage and this is the second time the injector in number 3 cylinder has gone bad. Anything…

1988 Ford F-150 Truck
I would like to remove the pollution control system from my 1988 F-150, 4.9L I6 300 4x4. Can anyone…

my 99 M chrysler has started to…
my 99 M chrysler has started to cool and then starts to give off heat in the ac vents and then cool…

dodge 2000 intrepid
bought this car right off the show room floor in Bartow fl to this date I have not had any work done on…

starting issue, 2002 dodge…
My 2002 Dodge Caravan wouldn't crank. I tested some things, replaced the battery. After installing the…

;-)
;-)

stereo pin
I put a new battery in my girl friends 94 900 and it wants a code for the radio. There is nothing in the…

Coolant temp on Saturn Sky
I just purchased a 2007 Saturn Sky Redline. As I was driving yesterday I happen to have the info set on…

Saturn Sky Red Line
I just purchased a 2007 Saturn Sky Redline. I noticed will driving yesterday that when I turned on the…

Que pour la place trange
Que pour la place trange

They have birthday today:

Esther

all >>

Forums:

topic feeds

• CarGuru all topics, blogs and comments

• Driving

• Formula-1

• Indycar

• Nascar

• Other sport

• Technology

• 4 x 4

• Volkswagen

• Mercedes

• Acura

• Alfa-romeo

• Audi

• BMW

• Chrysler

• Dodge

• Ford

• General Motors

• Jeep Willys

• Honda

• Hyundai

• Mazda

• Nissan

• Peugeot

• Pontiac

• Porsche

• Saab

• Saturn

• Toyota

• Volvo

• Buy / Sell

• Open discussion

• Anonymous

Discuss:

Bosch
Pretty cool website, I know Bosch has some awesome wiper blades and plugs but did not know they…

Help Needed: Can't Engage the…
In other words, I can't press the parking brake pedal down. This is a 2002 Explorer. I normally only…

Help: 2002 AWD Rolls in Park
I have 2002 AWD V8 Mountaineer Auto Tranny. I removed the front drive shaft because the joint is bad…

Re: 1996 Ford Explorer XLT V8…
jonezzzman wrote: Didn't get any feedback on this. But, I went ahead and tackled the project myself…

2000 Ford Explorer water in…
2000 Ford Explorer X series VIN 4.0 OHV Auto Trans The crust of it: around Nov, Dec 2008 it was…

Recent forum topics:

Brake Lights won't work
brake lights on 1996 Grand Am won't work. Fuse and lights are fine. Suggestions?

honda civic 87 model problem
i would like some information on why my honda civic wont start at times after its hot when running it…

mazda premacy glowplug lights…
i have a mazda premacy 2litre diesel . have a problem at the moment ,glowplug light flashing with loss…

I have a 96 chrysler new york…
I have a 96 chrysler new york lhs but no owners manuel and on the message center there is a light that i…

Recent forum comments:

RE: Ask How To Replace Headlight…
how do I release the locking ring on the headlamp bulb in a 99 dodge ram 2500?

RE: Re: Transmission shudder when…
who are you speaking to

RE: Re: Transmission shudder when…
I can feel something like a kick when I first hit the gas pedal when I take off.

RE: stuck hatchback
on the rear gate that is

RE: stuck hatchback
just my latch is stuck and the door wont close on my 2000 sub outback limited

RE: 1999 Chrysler T&C - Speed…
I am reading all of this and am amazed at how bad I am getting ripped off by my Chrysler dealership....4…

RE: How to duplicate Navtech CD’s
where can i buy nav cd's for a 2003 s class mercedes also the latest version for a 2005 sl?

RE: Heating problem in 1988 Honda…
well thats no always true!!! my husband replaced the thermostat/thermometer..... and the water…

RE: Mitsubishi Diamante ECU faults…
how did you read the codes

RE: 98 Dodge Grand Caravan Problems
I had the same problem with the instrument panel, after about a months worth of greif, and dollars…

Модератор:

Administrator


Re: SN65 project
Guest 29 January 2005 00:13:20
	Hi Bill I have just posted some updates to the misc forums. If you would like to see comments and photos follow the following links... The project is comming along nicely. We have photos of the trial fit of the dash. How do you like the look of the 03 dash in the 65 fastback? I think it looks right at home there. http://forums.stangnet.com/showthread.php?t=513328&page=1&pp=25 http://www.svtperformance.com/forums/showthread.php?t=134855&page=1&p... Bob
		Add comment


Guest 9 February 2005 00:29:09 [ permanent link ]
	Hi Bill, We are shooting for the "big un-veiling" at this years Hot Rod Power Tour. We should have the car on the road in May and tuned up & ready to go on the first leg of the week long PT on June 4th. Maybe we will see you there. For a better choice than HP, check out the threads on the following links http://eleanor.pro3i.com/showthread.php?t=513328&page=1&pp=25 http://www.svtperformance.com/forums/showthread.php?t=134855&page=1&pp=25 Bob
		Add comment


Joe 9 February 2005 05:47:41 [ permanent link ]
	rj@hydroflotech.com wrote in news:1107894549.353069.89780@g14g2000cwa.googlegroups.com: Hi Bill,> We are shooting for the "big un-veiling" at this years Hot Rod Power> Tour. We should have the car on the road in May and tuned up &> ready to go on the first leg of the week long PT on June 4th.> Maybe we will see you there.> For a better choice than HP, check out the threads on the following> links> http://eleanor.pro3i.com/showthread.php?t=513328&page=1&pp=25> http://www.svtperformance.com/forums/showthread.php?t=134855&page=1 &p> p=25 > Bob I've been following this in the forums for a while now. This project has got to be one of the best if not _the_ best I've seen in years. Bob, best of luck - can't wait to see the finished project. Joe Calypso Green '93 5.0 LX AOD hatch with a few goodies Black '03 Dakota 5.9 R/T CC
		Add comment


Bill 18 February 2005 04:23:48 [ permanent link ]
	True, but you could chip the paint driving it across town too! Have you thought about using the 3M or other brands of paint protection film? The other alternative would be to rent an autohauler... As far as the color I'd paint it whatever color YOU want. My auto body guy thought I was NUTS to paint my '64.5 Vintage Burgandy, but it's my car and I think it came out looking great! bill
		Add comment


Guest 25 February 2005 17:50:45 [ permanent link ]
	Hi All, Anyone out there know where I can find the driver and passenger side SS channels that retain the window gaskets. These do not appear to be available through any aftermarket supplier. HELP!!! Bob Come see this WIP at Julian's Collision Center St Charles, IL 630-762-0387
		Add comment


Brent P 26 February 2005 08:44:58 [ permanent link ]
	In article <1109339445.039228.131860@o13g2000cwo.googlegroups.com>, rj@hydroflotech.com wrote:> Hi All,> Anyone out there know where I can find the driver and passenger side SS> channels that retain the window gaskets. These do not appear to be> available through any aftermarket supplier. Have you tried any of the 'mustang only' salvage yards out west? I can't think of any off the top of my head, but someone here should know a decent one. I would guess they would have these parts in good condition.
		Add comment


Guest 3 March 2005 17:25:55 [ permanent link ]
	Hi All, I thought I would try posting a project update here and see if you would like me to continue doing so..... I spent yesterday struggling with the hood hinge issue. The new hinges we ordered would have solved our problems if they fit, but they were so large that I would have had to cut down into the lower cowl (into the passenger compartment) to get them to fit. Well, that was not going to happen, so I drew up some ideas on how we could modify the 03 cobra hinges and ran them past Wayne. After resolving a few issues with the design, I asked Wayne if I could do all the fab work. He said "There are plenty of other things I need to do, so go for it". Here are the photos. I had to section the hinge, add 1 1/2" of 10 gage and shape the section into a gooseneck to clear the cowl when the hood opens. I think they came out great. http://www.horsepowered.com/forums/attachment.php?attachmentid=2087 http://www.horsepowered.com/forums/attachment.php?attachmentid=2088 Today, I can fab the brackets for mounting the hood and re-align the front end so that we can complete fabrication on the chassis this weekend. WoHoo!!! Catch you all later. SN65 Come see this WIP at Julian's Collision Center http://www.julianscollisioncenter.com/
		Add comment


Guest 8 March 2005 19:28:28 [ permanent link ]
	Hi All, We came close, but did not completely finish the front aprons this past weekend. We were having trouble with the front end dimensions and gaps. We finally got them as close as physically possible (nice consistent gaps, dim's within 1/4"). But to achieve that we had to assemble and disassemble the front end about 7 times. Each time we would resolve one issue and have another rear its ugly head. http://www.horsepowered.com/forums/attachment.php?attachmentid=2103 http://www.horsepowered.com/forums/attachment.php?attachmentid=2104 We still have to position and weld the cowl in place, but that is something that we can accomplish in an afternoon. Also, we contacted the media blaster and he cannot fit us into the schedule until early next week. That being the case, we will continue with finer and finer detail work. For example, we are working on the brackets for mounting the trunk latch. You will notice that we have reversed the typical trunk config and mounted the latch on the car and the striker will mount on the lid. http://www.horsepowered.com/forums/attachment.php?attachmentid=2105 We will continue to work on brackets, and fitting up different pieces until the blaster is ready for us. Time to get back to work. SN65 Come see this WIP at Julian's Collision Center http://www.julianscollisioncenter.com/
		Add comment


Brent P 9 March 2005 22:15:48 [ permanent link ]
	In article <1110295708.230890.312200@o13g2000cwo.googlegroups.com>, rj@hydroflotech.com wrote: brackets for mounting the trunk latch. You will notice that we have> reversed the typical trunk config and mounted the latch on the car and> the striker will mount on the lid.> http://www.horsepowered.com/forums/attachment.php?attachmentid=2105 Looks like the way it's done on mavericks. If you run into problems maverick parts might help.
		Add comment


Guest 11 March 2005 01:25:09 [ permanent link ]
	Hi All, Today, Wayne fabed up the side gas filler door. He had to trial fit the gas tank and the filler neck to get an accurate location. He marked the location of the plastic inner housing on the quarter. He removed the filler neck and the gas tank. He located the center point of the gas door, and drilled the center hole from the inside. When he walked around to the outside of the car, he noticed that the hole he drilled was within 1/8" of the "X" I drew on the car marking the door location. I told him to trust me next time and he wouldn't have to go through so much work. Anyway, this is going to be so cool. Wayne ground smooth and flanged the rough cut opening so that the 03 door mounting ring (the part we cut off the Cobra) sits flush with the 65 quarter panel. http://www.horsepowered.com/forums/attachment.php?attachmentid=2112 http://www.horsepowered.com/forums/attachment.php?attachmentid=2113 Catch you later. SN65 Come see this WIP at Julian's Collision Center http://www.julianscollisioncenter.com/
		Add comment


Guest 18 March 2005 00:05:36 [ permanent link ]
	Hi All, Entries for the graphics contest are rolling in. You only have 14 days left. A lot of good ideas are coming in. I am looking forward to seeing yours. SN65 Come see this WIP at Julian's Collision Center http://www.julianscollisioncenter.com/
		Add comment


Brent P 28 March 2005 23:32:46 [ permanent link ]
	In article <1111856671.899235.243490@l41g2000cwc.googlegroups.com>, rj@hydroflotech.com wrote: I am excited about the open house / get-2-gether. We are looking> forward to finally meeting a lot of the people we have made friends> with over the past 6 months. What time is the g-2-g? I think I remember reading one of your posts in one of the forums that it was 8am, sat apr 2. Now I can only find posts saying apr 2nd but not the time of day.
		Add comment


Brent P 28 March 2005 23:35:38 [ permanent link ]
	In article <fv2dnbkgv_tDxtXfRVn-tA@comcast.com>, Brent P wrote:> In article <1111856671.899235.243490@l41g2000cwc.googlegroups.com>, rj@hydroflotech.com wrote:> I am excited about the open house / get-2-gether. We are looking>> forward to finally meeting a lot of the people we have made friends>> with over the past 6 months.> What time is the g-2-g? I think I remember reading one of your posts in > one of the forums that it was 8am, sat apr 2. Now I can only find posts > saying apr 2nd but not the time of day. Of course 30 seconds after posting the question, I find the post.... http://www.svtperformance.com/forums/showthread.php?t=134855&page=13&pp=25 Post #311 in case anyone else is wondering.. (my memory was correct)
		Add comment

CarGuru > Ford > Re: SN65 project 28 March 2005 23:35:38

	see also: IPS: Indianapolis: Top three finishers… NASCAR-CUP: Charlotte: Riggs, Mayfield…		pass tests:		see also: Ford 6000 cd 1989 chevy surburban ecm-b fuse keeps… JUST PAYED FOR A 1999 SE 9-5 SAAB

Copyright © 2001—2009 Car-Guru
Idea: Miсhael Monashev
See Help and FAQ in the community support.car-guru.com.
Write in the community about the bugs you have noticedbugs.car-guru.com.
Write your offers and comments in the communities suggest.car-guru.com.
Information for parents.
Write us at:

If you would like to report an abuse of our service, such as a spam message, please .




Get comments by e-mail Add to favourites

respect your talk pals, avoid using obscene language, typing entire messages in CAPS, posting buy/sell ads or violating netiquette or the RF Criminal Code..

Re: SN65 project

Add new comment