How to change personal info?
NY State Inspection Emissions Failure
Hello Guest		   
  • Login
• Register…
• Start blog		   • Who, Where, When
• What is interesting here?
• Duels		   • Polls
• Avatars
• Interests		   • Cities and Countries
• Random blog
• Users search		   • Search
• Games
• Tests
• CarGuru		   • Ñîîáùåñòâà
• Talxy Chat
• Horoscope
• Online		  
Register!
CarGuru > Ford > NY State Inspection Emissions Failure 7 March 2005 07:36:50
  Recent blog posts: 
starting issue, 2002 dodge…
My 2002 Dodge Caravan wouldn't crank. I tested some things, replaced the battery. After installing the…

1988 Ford F-150 Truck
I would like to remove the pollution control system from my 1988 F-150, 4.9L I6 300 4x4. Can anyone…

my 99 M chrysler has started to…
my 99 M chrysler has started to cool and then starts to give off heat in the ac vents and then cool…

;-)
;-)­

dodge 2000 intrepid
bought this car right off the show room floor in Bartow fl to this date I have not had any work done on…

Que pour la place trange
Que pour la place trange

Saturn Sky Red Line
I just purchased a 2007 Saturn Sky Redline. I noticed will driving yesterday that when I turned on the…

Coolant temp on Saturn Sky
I just purchased a 2007 Saturn Sky Redline. As I was driving yesterday I happen to have the info set on…

gandon.......
gandon.......

you
you

  Forums:   
    topic feeds

• CarGuru  all topics, blogs and comments

• Driving

• Formula-1

• Indycar

• Nascar

• Other sport

• Technology

• 4 x 4

• Volkswagen

• Mercedes

• Acura

• Alfa-romeo

• Audi

• BMW

• Chrysler

• Dodge

• Ford

• General Motors

• Jeep Willys

• Honda

• Hyundai

• Mazda

• Nissan

• Peugeot

• Pontiac

• Porsche

• Saab

• Saturn

• Toyota

• Volvo

• Buy / Sell

• Open discussion

• Anonymous
  Discuss: 
Bosch
Pretty cool website, I know Bosch has some awesome wiper blades and plugs but did not know they…

Help Needed: Can't Engage the…
In other words, I can't press the parking brake pedal down. This is a 2002 Explorer. I normally only…

Help: 2002 AWD Rolls in Park
I have 2002 AWD V8 Mountaineer Auto Tranny. I removed the front drive shaft because the joint is bad…

Re: 1996 Ford Explorer XLT V8…
jonezzzman wrote: Didn't get any feedback on this. But, I went ahead and tackled the project myself…

2000 Ford Explorer water in…
2000 Ford Explorer X series VIN 4.0 OHV Auto Trans The crust of it: around Nov, Dec 2008 it was…
  Recent forum topics: 
I have a 96 chrysler new york…
I have a 96 chrysler new york lhs but no owners manuel and on the message center there is a light that i…

...96 Accord tranny issue
I have a 1996 honda accord ex automatic. on a cold start the car shits gears realitively fine. however…

i just want to find out how…
i just want to find out how much it will cost to change an ignition to a 2001 pontiac grand am and can i…

What is causing my 97 Toyota…
What is causing my 97 Toyota Camry to hesitate like it is about to stall?
  Recent forum comments:
RE: stuck hatchback
just my latch is stuck and the door wont close on my 2000 sub outback limited

RE: stuck hatchback
on the rear gate that is

RE: 2001 PT Cruiser Problems??????
lor

RE: turn signal problams
Try a new flasher because it's cheaper. If that doesn't work then you probably need a new turn signal…

RE: Re: Road test - DMV is cracked
Well, I passed on the 4th roadtest. The examiner said I should have passed it the first time. I have…

RE: Still trying to find an NB…
Anon wrote: I got the real thing last year for $55 from Trussville Mazda…

RE: Re: 1996 neon problems.. :(
no spark

RE: Re: Transmission shudder when…
I can feel something like a kick when I first hit the gas pedal when I take off.

RE: Re: Transmission shudder when…
who are you speaking to

RE: How to duplicate Navtech CD’s
where can i buy nav cd's for a 2003 s class mercedes also the latest version for a 2005 sl?
  Ìîäåðàòîð:
 Administrator

NY State Inspection Emissions Failure

HrseyCar 7 March 2005 04:02:16
 The night before I was to bring in my '98 Explorer for state inspection
my check engine light came on. I corrected the problem and cleared the
code and re-set the MIL light.
The next morning the car failed due to OBD Monitor Readiness Status:
Catalyst, Evaporative System and EGR System "Not Ready". Question:
When the code was cleared and the MIL re-set did that also re-set the
status of these monitors? From what I have found out so far, there are
certain driving conditions that must be met for these tests to be
performed. 3 days later I put an Autoray EZ-Read 1000 Code Reader on
the car and ran the Monitor Option Menu to read the "Readiness Tests'.
The 3 in question all showed a "Completed" status. Does this mean the
OBD Monitor Readiness Status for these 3 tests are now "Ready" and the
car will pass inspection?

Thanks for the help.
Rob
Add comment
Jim Warman 7 March 2005 07:36:50 [ permanent link ]
 Ahhh, the html is gone...

When you reset the codes on your car, you cleared part of the Keep Alive
Memory and generated a P1000. This code indicates that not all of the
systems monitors have completed (obviously, there was a problem and the
codes were cleared and now the monitors have to run their program). A
problem with one system can affect the performance of other systems....
thusly, clearing codes resets all the monitors back to "not ready". Some
monitors take longer than others to complete... sometimes even over several
drive cycles.

It is possible that all the monitors completed in the 3 days you describe...
I live in a cold climate and it can take a long time for the EVAP monitor to
complete.I am not familiar with the tool you describe, but if it says that
all the monitors have completed, I have no reason to doubt it. On our tools,
we would access mode 6 data and this would tell us which monitors haven't
completed and give us an indication of why they haven't.

HTH


"HrseyCar" <hrseycar@optonline­.net> wrote in message
news:c3NWd.1223$t91­.816@fe10.lga...
The night before I was to bring in my '98 Explorer for state inspection my
check engine light came on. I corrected the problem and cleared the code
and re-set the MIL light.
The next morning the car failed due to OBD Monitor Readiness Status:
Catalyst, Evaporative System and EGR System "Not Ready". Question: When
the code was cleared and the MIL re-set did that also re-set the status of
these monitors? From what I have found out so far, there are certain
driving conditions that must be met for these tests to be performed. 3 days
later I put an Autoray EZ-Read 1000 Code Reader on the car and ran the
Monitor Option Menu to read the "Readiness Tests'. The 3 in question all
showed a "Completed" status. Does this mean the OBD Monitor Readiness
Status for these 3 tests are now "Ready" and the car will pass inspection?

Thanks for the help.
Rob


Add comment
 

Add new comment

As:
Login:  Password:  
 
 
  
 
respect your talk pals, avoid using obscene language, typing entire messages in CAPS, posting buy/sell ads or violating netiquette or the RF Criminal Code..

CarGuru > Ford > NY State Inspection Emissions Failure 7 March 2005 07:36:50
see also:
MOTOGP: Stoner takes home Turkish GP…
ALMS: Houston: Tafel Racing race report
MOTOGP: Turkish GP: Honda LCR Saturday…
pass tests:
see also:
Hyundai Accent GT 2004 Flapping Noise
Automotive challenge
96 chevy c1500 lunging????
  Copyright © 2001—2009 Car-Guru
Idea: Miñhael Monashev
See Help and FAQ in the community support.car-guru.com.
Write in the community about the bugs you have noticedbugs.car-guru.com.
Write your offers and comments in the communities suggest.car-guru.com.
Information for parents.
Write us at:
If you would like to report an abuse of our service, such as a spam message, please .