What type of clutch ??

Recent blog posts:

95 mirage
I have a 95 mirage and this is the second time the injector in number 3 cylinder has gone bad. Anything…

1988 Ford F-150 Truck
I would like to remove the pollution control system from my 1988 F-150, 4.9L I6 300 4x4. Can anyone…

my 99 M chrysler has started to…
my 99 M chrysler has started to cool and then starts to give off heat in the ac vents and then cool…

dodge 2000 intrepid
bought this car right off the show room floor in Bartow fl to this date I have not had any work done on…

starting issue, 2002 dodge…
My 2002 Dodge Caravan wouldn't crank. I tested some things, replaced the battery. After installing the…

;-)
;-)

stereo pin
I put a new battery in my girl friends 94 900 and it wants a code for the radio. There is nothing in the…

Coolant temp on Saturn Sky
I just purchased a 2007 Saturn Sky Redline. As I was driving yesterday I happen to have the info set on…

Saturn Sky Red Line
I just purchased a 2007 Saturn Sky Redline. I noticed will driving yesterday that when I turned on the…

Que pour la place trange
Que pour la place trange

They have birthday today:

Esther

all >>

Forums:

topic feeds

• CarGuru all topics, blogs and comments

• Driving

• Formula-1

• Indycar

• Nascar

• Other sport

• Technology

• 4 x 4

• Volkswagen

• Mercedes

• Acura

• Alfa-romeo

• Audi

• BMW

• Chrysler

• Dodge

• Ford

• General Motors

• Jeep Willys

• Honda

• Hyundai

• Mazda

• Nissan

• Peugeot

• Pontiac

• Porsche

• Saab

• Saturn

• Toyota

• Volvo

• Buy / Sell

• Open discussion

• Anonymous

Discuss:

1983 z28 camaro brake hose…
Help I am trying to replace the front brake hose on my 83 camaro I just bought it a week ago and also…

stuck hatchback
I have a 1999 Subaru Outback with a stuck hatchback. The remote opener seems to be functioning properly…

How to duplicate Navtech CD’s
Considering that Navtech doesn’t want to support further updates of the older CD format, I don’t see any…

air noise on a 2009 Gm Tahoe
2009 tahoe, driving at 42 miles an hour I get air noise, inside the vehicle. This is not engine noise I…

Hello
Hello!

Recent forum topics:

2005 nissan sentra
I removed the radio in my 2005 sentra to replace the tempature control knob and the radio won't turn on…

Brake Lights won't work
brake lights on 1996 Grand Am won't work. Fuse and lights are fine. Suggestions?

honda civic 87 model problem
i would like some information on why my honda civic wont start at times after its hot when running it…

mazda premacy glowplug lights…
i have a mazda premacy 2litre diesel . have a problem at the moment ,glowplug light flashing with loss…

Recent forum comments:

RE: Ask How To Replace Headlight…
how do I release the locking ring on the headlamp bulb in a 99 dodge ram 2500?

RE: Re: Transmission shudder when…
who are you speaking to

RE: Re: Transmission shudder when…
I can feel something like a kick when I first hit the gas pedal when I take off.

RE: stuck hatchback
on the rear gate that is

RE: stuck hatchback
just my latch is stuck and the door wont close on my 2000 sub outback limited

RE: 1999 Chrysler T&C - Speed…
I am reading all of this and am amazed at how bad I am getting ripped off by my Chrysler dealership....4…

RE: How to duplicate Navtech CD’s
where can i buy nav cd's for a 2003 s class mercedes also the latest version for a 2005 sl?

RE: Heating problem in 1988 Honda…
well thats no always true!!! my husband replaced the thermostat/thermometer..... and the water…

RE: Mitsubishi Diamante ECU faults…
how did you read the codes

RE: 98 Dodge Grand Caravan Problems
I had the same problem with the instrument panel, after about a months worth of greif, and dollars…

Модератор:

Administrator


What type of clutch ??
Fitzy 23 April 2005 00:24:01
	Hi All 1995 1275 Rover Mini Sidewalk can anyone advise what type of clutch is fitted to this mini, Verto or none Verto, Thanks Fitzy
		Add comment


Steve68s 23 April 2005 01:34:57 [ permanent link ]
	Verto, fitted from 1983 onwards I think, don't ask if I have a clutch puller I lent it to someone in Whitchurch & never got it back, Steve. "Fitzy" <peterfitzpatrick@btopenworld.com> wrote in message news:d4bmh1$t38$1@nwrdmz01.dmz.ncs.ea.ibs-infra.bt.com...> Hi All> 1995 1275 Rover Mini Sidewalk> can anyone advise what type of clutch is fitted to this mini, Verto or > none Verto,> Thanks> Fitzy>
		Add comment


Fitzy 23 April 2005 02:01:06 [ permanent link ]
	Hi Steve, Thanks for the reply, I have just had a email from Clive,,, another mini enthusiast,, he has basically said the same as you, Verto,,, Are the clutch pullers the same for Verto and none Verto, Thanks (how's the S doing these days) Fitzy "Steve68s" <steve68s(remove)@btinternet.com> wrote in message news:42696e03$0$380$cc9e4d1f@news.dial.pipex.com...> Verto, fitted from 1983 onwards I think, don't ask if I have a clutch> puller I lent it to someone in Whitchurch & never got it back,> Steve.> "Fitzy" <peterfitzpatrick@btopenworld.com> wrote in message> news:d4bmh1$t38$1@nwrdmz01.dmz.ncs.ea.ibs-infra.bt.com...>> Hi All>> 1995 1275 Rover Mini Sidewalk>> can anyone advise what type of clutch is fitted to this mini, Verto or>> none Verto,>> Thanks>> Fitzy>>
		Add comment


Steve68s 23 April 2005 02:53:32 [ permanent link ]
	Yes, the puller should come with 2 sets of bolts, one for the early flywheels & one for the later ones, the S is fine, sort of hibernating, I got a bare mk 1 shell now in Surrey laid up, so you never know what may be around the corner!! Steve. "Fitzy" <peterfitzpatrick@btopenworld.com> wrote in message news:d4bs71$ba6$1@nwrdmz02.dmz.ncs.ea.ibs-infra.bt.com...> Hi Steve,> Thanks for the reply,> I have just had a email from Clive,,, another mini enthusiast,,> he has basically said the same as you, Verto,,,> Are the clutch pullers the same for Verto and none Verto,> Thanks> (how's the S doing these days)> Fitzy> "Steve68s" <steve68s(remove)@btinternet.com> wrote in message> news:42696e03$0$380$cc9e4d1f@news.dial.pipex.com...>> Verto, fitted from 1983 onwards I think, don't ask if I have a clutch>> puller I lent it to someone in Whitchurch & never got it back,>> Steve.>> "Fitzy" <peterfitzpatrick@btopenworld.com> wrote in message>> news:d4bmh1$t38$1@nwrdmz01.dmz.ncs.ea.ibs-infra.bt.com...>>> Hi All>>> 1995 1275 Rover Mini Sidewalk>>> can anyone advise what type of clutch is fitted to this mini, Verto or>>> none Verto,>>> Thanks>>> Fitzy>>>
		Add comment


Fitzy 28 April 2005 18:54:53 [ permanent link ]
	well after a bit of a struggle getting the flywheel off, I finally fitted the clutch, only to find there is a slight vibration when the engine is revved, it didn't have this before any one have any Ideas what could be the cause of this, TIA "Steve68s" <steve68s(remove)@btinternet.com> wrote in message news:4269806d$0$344$cc9e4d1f@news.dial.pipex.com...> Yes, the puller should come with 2 sets of bolts, one for the early > flywheels & one for the later ones, the S is fine, sort of hibernating, I > got a bare mk 1 shell now in Surrey laid up, so you never know what may be > around the corner!!> Steve.> "Fitzy" <peterfitzpatrick@btopenworld.com> wrote in message > news:d4bs71$ba6$1@nwrdmz02.dmz.ncs.ea.ibs-infra.bt.com...>> Hi Steve,>> Thanks for the reply,>> I have just had a email from Clive,,, another mini enthusiast,,>> he has basically said the same as you, Verto,,,>> Are the clutch pullers the same for Verto and none Verto,>> Thanks>> (how's the S doing these days)>> Fitzy>> "Steve68s" <steve68s(remove)@btinternet.com> wrote in message>> news:42696e03$0$380$cc9e4d1f@news.dial.pipex.com...>>> Verto, fitted from 1983 onwards I think, don't ask if I have a clutch>>> puller I lent it to someone in Whitchurch & never got it back,>>> Steve.>>> "Fitzy" <peterfitzpatrick@btopenworld.com> wrote in message>>> news:d4bmh1$t38$1@nwrdmz01.dmz.ncs.ea.ibs-infra.bt.com...>>>> Hi All>>>> 1995 1275 Rover Mini Sidewalk>>>> can anyone advise what type of clutch is fitted to this mini, Verto or>>>> none Verto,>>>> Thanks>>>> Fitzy>>>>
		Add comment


Minifreek 29 April 2005 18:26:55 [ permanent link ]
	Did you put the locking washer/tab over on the big bolt on the end of the crankshaft? I know I didnt once and got a hell of a lot of vibration until the clutch let go!!!!!! "Fitzy" <peterfitzpatrick@btopenworld.com> wrote in message news:d4qtft$art$1@nwrdmz01.dmz.ncs.ea.ibs-infra.bt.com...> well after a bit of a struggle getting the flywheel off,> I finally fitted the clutch, only to find there is a slight vibration when > the engine is revved, it didn't have this before> any one have any Ideas what could be the cause of this,> "Steve68s" <steve68s(remove)@btinternet.com> wrote in message > news:4269806d$0$344$cc9e4d1f@news.dial.pipex.com...>> Yes, the puller should come with 2 sets of bolts, one for the early >> flywheels & one for the later ones, the S is fine, sort of hibernating, I >> got a bare mk 1 shell now in Surrey laid up, so you never know what may >> be around the corner!!>> Steve.>> "Fitzy" <peterfitzpatrick@btopenworld.com> wrote in message >> news:d4bs71$ba6$1@nwrdmz02.dmz.ncs.ea.ibs-infra.bt.com...>>> Hi Steve,>>> Thanks for the reply,>>> I have just had a email from Clive,,, another mini enthusiast,,>>> he has basically said the same as you, Verto,,,>>> Are the clutch pullers the same for Verto and none Verto,>>> Thanks>>> (how's the S doing these days)>>> Fitzy>>> "Steve68s" <steve68s(remove)@btinternet.com> wrote in message>>> news:42696e03$0$380$cc9e4d1f@news.dial.pipex.com...>>>> Verto, fitted from 1983 onwards I think, don't ask if I have a clutch>>>> puller I lent it to someone in Whitchurch & never got it back,>>>> Steve.>>>> "Fitzy" <peterfitzpatrick@btopenworld.com> wrote in message>>>> news:d4bmh1$t38$1@nwrdmz01.dmz.ncs.ea.ibs-infra.bt.com...>>>>> Hi All>>>>> 1995 1275 Rover Mini Sidewalk>>>>> can anyone advise what type of clutch is fitted to this mini, Verto or>>>>> none Verto,>>>>> Thanks>>>>> Fitzy>>>>>
		Add comment


Fitzy 5 May 2005 02:57:56 [ permanent link ]
	Yep, Bolt tightened to 112 lb ft, and washer was bent in to correct positions, I think I may have cracked the flywheel when I used a drift to impact it from the starter hole, I am going to remove the complete assembly again, and inspect every component, looks like the weekend is the only chance I will have, due to other commitments, I will come back and let the group know what I find, Thanks for the input Fitzy "minifreek" <cb001r5377@blueyonder.co.uk> wrote in message newsurce.1306$j54.1187@fe3.news.blueyonder.co.uk...> Did you put the locking washer/tab over on the big bolt on the end of the > crankshaft? I know I didnt once and got a hell of a lot of vibration until > the clutch let go!!!!!!> "Fitzy" <peterfitzpatrick@btopenworld.com> wrote in message > news:d4qtft$art$1@nwrdmz01.dmz.ncs.ea.ibs-infra.bt.com...>> well after a bit of a struggle getting the flywheel off,>> I finally fitted the clutch, only to find there is a slight vibration >> when the engine is revved, it didn't have this before>> any one have any Ideas what could be the cause of this,>> "Steve68s" <steve68s(remove)@btinternet.com> wrote in message >> news:4269806d$0$344$cc9e4d1f@news.dial.pipex.com...>>> Yes, the puller should come with 2 sets of bolts, one for the early >>> flywheels & one for the later ones, the S is fine, sort of hibernating, >>> I got a bare mk 1 shell now in Surrey laid up, so you never know what >>> may be around the corner!!>>> Steve.>>> "Fitzy" <peterfitzpatrick@btopenworld.com> wrote in message >>> news:d4bs71$ba6$1@nwrdmz02.dmz.ncs.ea.ibs-infra.bt.com...>>>> Hi Steve,>>>> Thanks for the reply,>>>> I have just had a email from Clive,,, another mini enthusiast,,>>>> he has basically said the same as you, Verto,,,>>>> Are the clutch pullers the same for Verto and none Verto,>>>> Thanks>>>> (how's the S doing these days)>>>> Fitzy>>>> "Steve68s" <steve68s(remove)@btinternet.com> wrote in message>>>> news:42696e03$0$380$cc9e4d1f@news.dial.pipex.com...>>>>> Verto, fitted from 1983 onwards I think, don't ask if I have a clutch>>>>> puller I lent it to someone in Whitchurch & never got it back,>>>>> Steve.>>>>> "Fitzy" <peterfitzpatrick@btopenworld.com> wrote in message>>>>> news:d4bmh1$t38$1@nwrdmz01.dmz.ncs.ea.ibs-infra.bt.com...>>>>>> Hi All>>>>>> 1995 1275 Rover Mini Sidewalk>>>>>> can anyone advise what type of clutch is fitted to this mini, Verto >>>>>> or>>>>>> none Verto,>>>>>> Thanks>>>>>> Fitzy>>>>>>
		Add comment




Get comments by e-mail Add to favourites

respect your talk pals, avoid using obscene language, typing entire messages in CAPS, posting buy/sell ads or violating netiquette or the RF Criminal Code..

	see also: Lincoln Highway Special Resource Study… No new transit for now on WWB (was Re… I-40 Nashville road project (was Re…		pass tests:		see also: Intake Gasket 1986 Toyota Pick Up truck, 4 cylinder. GMC ABS light and Transmission

What type of clutch ??

Add new comment